How Can We Help?
Step 3: BG Pretreatment, AKA Spotter
After the dry extraction (rake and detailed vacuum to remove the insoluble material), which makes up about 70% of the dirt found in carpet, what remains is residue from food and drink spills or normal foot traffic.
Note: Proper raking and vacuuming also decompresses the carpet fibers, which allows our proprietary pretreatment and the upcoming VLM cleansing foam to penetrate more effectively.
This pretreatment is specifically formulated with enzymes that tackle residue and prepare the carpet for the next step.
How The Pretreatment Works:
- Binding – The pretreatment enzyme attaches to the remaining residue (not carpet fibers).
- Breaking Down – The enzyme begins breaking the bonds, so the residue is no longer tightly attached to the carpet fibers.
- Preparing for Cleansing – Because the bonds are already weakened, the next step, VLM cleanse, can work more effectively. The VLM cleansing solution contains different enzymes, and together they finish breaking down the remaining residue.

Longer isn’t better. After the recommended dwell time, enzymes lose mobility, reducing their ability to reach and break down additional soils.
Get the Most from your Spotter
For severe stains, gently warming your spotter can improve its effectiveness. Place the spotter sprayer canister in a bucket of hot (not boiling) water for a few minutes before application. The added warmth helps the enzymes work more efficiently, but avoid excessive heat, which can damage the enzymes and reduce their effectiveness.
For maximum cleaning performance, allow your spotter to ferment for at least two weeks before using it. To avoid running out of fully matured spotter, always keep two batches fermenting on a rotating schedule.
The Magic is in the Pretreatment
The pretreatment is not a stand-alone step; it’s specifically designed to target residue, not insoluble material. The only chance to remove insoluble soils is during the dry extraction (rake and vacuum) step.
Using the pretreatment properly (making sure it’s mixed at the right strength, applied thoroughly to freshly vacuumed carpet, and with the correct dwell time of 7-12 minutes), especially in high-traffic areas, is crucial. These areas collect the most residue from food, drink, and foot traffic. If pretreatment isn’t applied correctly, the VLM cleansing foam won’t be able to do its job. This makes Step 3 a critical link in our 5-step cleaning process and the reason we can achieve a deeper clean.
What Are High Traffic Areas?
- Doorways
- Halls
- Stairs
- Sofa armrests
- Sectional cushions
- Dining chair seats and backs
- Dog beds!
- Closet doors
- The carpet between the sofa and the coffee table
- Carpet around a bed
- Sofa headrests
- Common walking paths
- Bed frame headboards
- Any place you can visually see dirt
Mixing Instructions
Mix 506 Spotter Powder using hot (not boiling) water. Watch video here.

Mixing Ratios
- Per Gallon: 3–4 tablespoons of powder
- 5-Gallon Fermentation Container: 15–20 tablespoons of powder
If you ever forget the mixing ratio, simply check the product label—the correct measurements are always printed on the container.
After mixing:
- Stir or agitate until the powder is fully dissolved.
- Secure the lid and label the container with the mixing date.
- Allow the solution to ferment for at least 1- 2 weeks before use for maximum cleaning performance.
- When filling your pump sprayer, always pour the solution through a paint strainer or filter to remove crystals that may have formed during fermentation and prevent clogged spray tips.
Pro Tip: Keep two 5-gallon fermentation containers on a rotating schedule—one for daily use and one aging. This ensures you always have a fully fermented batch ready to go.